 |
 |
 |
|
Any HVLP spray system enables deposit of HTP-100 in every situation. You only need a 500 °F heat source, including an IR lamp, heat gun, or in-service cure! |
Ceramic repair is easy with HTP-100—simply spray cracked coatings or refractories and cure in-service to seal the damaged materials! |
HTP-100 may be fully cured in-service—this kiln liner was coated and cured in-situ, and retained its emissivity after >100 cycles and 1000s of hours >1470 °F! |
|
HTP-100 can serve as a high-temperature adhesive in certain applications. It can be sprayed on both mating surfaces, which are then joined and fired to >500°F to achieve a durable high temperature joint capable of 1800°F, with at least 100 psi adhesive bond strength. |
 |
While welds and brazes are highly susceptible to corrosion in high-temperature plant infrastructure due to complex morphology and metallurgy. HTP-100 easily protects the complex joint structures, and provides effective galvanic corrosion protection for welds and brazes at high temperatures, where rapid oxidation can weaken the joint significantly.
